Month: May 2019

Anyone who knows me knows that I am a planner. I plan weekly menus before I go to the grocery store. I map out an entire two-week road trip months in advance ensuring that all hotels are booked for the right days and I know the precise driving time between stops. I write outlines for everything I write, and writing is what I do in my other life (in this one, too, you might well respond – I don’t outline blog posts, though, which is probably obvious!).

To be clear, when I started my writing career many years ago, I learned very quickly that to sell a non-fiction book to a publisher, I’d need to learn to write a book proposal which is nothing short of a complete outline among a lot of other stuff. So, I learned the process of book proposal writing well enough to sell seven or eight books that way. So, when it comes to my sewing and design life, I pretty much take that same approach.

Remember my cruise collection? That started with an actual inspiration board, moved on to sketches, then I created original patterns, chose fabrics planned for specific projects (no fabric hoarding here). My Little Black Dress project? It progressed the same way as did my three Little French Jackets. So, I have no reason to think that much of my work will be on the fly. Well, you know what they say: “The best laid plans…” Let me back up a bit.

When I returned to fashion design and sewing a few years ago, much had changed in that world. For years my sewing machine collected dust between jean hemming and costume sewing projects. (I’m happy to say that the costume sewing for children’s theatre actually resulted in a child who grew up to be successful in the performing arts.) Then, the muse struck and I finally had the time to devote to a return to something I had loved as a young adult. But, as I mentioned, there were many new things.

First there was the rotary cutter. When I first saw one, I thought, Doesn’t anyone use shears anymore? I soon learned that, yes, shears are the way to go on most projects for me. I use a rotary cutter mostly for interfacing and muslin cutting. Otherwise, they’re not my thing – dreadful on silk, wool, bouclé etc. Then there were the patterns.

I had never before heard that McCall’s, Vogue, Butterick and Simplicity were now referred to as “the big four” and not in a good way. What was that all about, I thought? This led me to learn about the new “indie” pattern companies. That sounds very democratic, doesn’t it? What I found was an avalanche of half-baked patterns, generally for tent-like bags that would fit everyone and no one – I’ll leave the rest of that rant for another day to equalize out all those rants from sewers who seem to dislike the “big four” with a passion. I happen to think they do very good work. But that’s for another day. Anyway, I finally found a legitimate one or two whose patterns interested me. Style Arc was one.

An Australian company, Style Arc’s sketches were what really drew me in. And I loved the fact that not all of their patterns are for knits which means that they really do have to know how to create something that fits. That being said, I decided to try one that was for a knit first.

The other thing that had changed was that not all patterns came in little envelopes anymore. Some of them were pdf downloads. Who knew? Well, just about everyone but me! Everyone has to have a first time, though, don’t they?

Style Arc produces both hard copy patterns and pdf’s. I decided to try my first pdf and my first indie pattern all in one fell swoop.

I used to have a cardigan sweater I loved so much it was actually worn out by the time I finished with it. t hadn’t been expensive, either, but was black (a must for a sweater that will serve me over the long term) and instead of buttons, it had a half-waist tie. It looked terrific with collared shirts, T-shirts, just everything.  It had a lot more style than the average cardigan. So, when I saw Style Arc’s Terry Tie Cardigan pattern, I was in.

I downloaded it and printed it out. Then, of course, I proceeded to tape it all together, as one must. Interesting. I cut out the pattern pieces and looked for some fabric.

Wouldn’t you think that something called “sweater knit” would be great? I did. But…well, stay with me.

There were just so many things wrong with the pattern in my view. It has these shoulder tucks—too many of them and way too small for the fabric I’d chosen. When I went back to Pattern Review to look at other people’s versions, they were all in flimsy jersey, so the tucks worked – but they were hideous. They were shapeless columns of jersey even with the belt tied. If I had looked at them first (lesson learned) I would never have chosen the pattern. But onward…

Okay, the first problem was the tucks, as I mentioned. Then, there was too much overlap at the front – and neither the centre front nor the waistline was marked by the way, a real problem with trying to get it to fit properly. The ties were too close to the centre front resulting in an odd look which was very evident on the ones done by others as I found out. Oh, and the seam allowances: you have to be very careful not to assume that they are standard 5/8 inch. They are not. The sleeves were too long (of course, this is an easy fix, but do women really look like orangutans?), leading me to think the sketch is quite misleading. So, what to do?

 

Back to the drawing board I go to try to rescue the project.

• First, redraw those shoulders without the tucks.
• Then, move the belt so that it is farther away from the centre front (which I had to find).
• Then, as I went to sew it, I realized that the belt was going to be butt ugly so I ditched it.
• Ditched the belt and took in the waist darts, extending them to the hem for a better fit.
• Put it on Gloria junior, and began to redesign it on the fly.

Actually, I really enjoyed the “semi-draping” process. I redrew the pattern and it no longer resembles the original in any way.

What I learned about myself is that designing on the fly might not be such a bad approach, and that I think I would enjoy learning draping as a design process.

I love it when I learn something from every project!