Posted in Men's Designs, Shirt-making, Style

My Bespoke Shirt Project: The final product

As 2020 draws to a close, I’m tempted to write a recap of my favourite design and sewing projects of 2019 just to see what I’ve learned. I’ve never done that before, but I think that I learned a few important things this year and need that recap for myself. But that will have to wait. I need to finish the story of the bespoke shirt adventure – my last sewing adventure for 2019.

After fiddling with a commercial pattern (Vogue 8759) and making the design changes required by my client (my husband!) it was time to consider fabric selection. The first thing I did was find some cotton shirting fabric in the buy-1-get-2-free sale online at fabricville.com.

The “cheapie” fabric for the test shirts.

This would give me enough fabric to create a complete muslin for fitting and a bit more to do the neckline and collar again if needed. But there was more to the fun of fabric selection than letting my fingers do the shopping. I discovered a new fabric store. But let’s go back a bit…

What are the two most important aspects of a bespoke shirt? As far as I’m concerned, they are the perfect fit and the perfect fabric. The perfect fit is a matter of careful measurements of both the body and the patterns and continuing on-model fitting throughout the process of making the test shirt. The perfect fabric is an altogether different story.

Fabric selection is mostly a personal choice as long as the fabrication itself is suitable for the kind of design. For example, you wouldn’t make a man’s dress shirt from flannel (if you did, it would no longer be a dress shirt by definition anyway). Or you wouldn’t make a man’s dress shirt from a knit. Just imagine how tacky that would be! And how difficult it would be if the man in question wished to wear a tie! So, how do you choose?

According to Jos. A. Bank, purveyors of dress shirts and lots more, there are three suitable fabrics. First, 100% cotton which is, according to them, “the most breathable, durable and comfortable of the three.”

Second, they suggest a blend of cotton and polyester, of which they seem to take a dim view. They suggest that most people gravitate toward these blends to save money which is why so many mass-market shirtings are this kind of blend. Polyester does reduce wrinkling (but 100% cotton is not all the same either. The cheaper it is, the more it wrinkles anyway). Their bottom line on polyester-cotton blends is this: They are “…far less breathable than other materials and less comfortable against your skin, and some people think its slight shine takes on a low-quality appearance. As a general rule, if you can afford it, steer clear of shirts with high polyester content and look for blends with 80% or more cotton.”

Their third selection is silk. I do love silk and there are so many different types of silk, many of which I know would not be suitable for my husband’s shirt. Silk charmeuse – I love it and even love to work with it – is one of my personal favourites for women’s blouses (I’ll talk about the difference between shirts and blouses in a future post since it’s one of my 2020 projects). But on my husband? Not a chance. Jos. A Banks reminds us that silk feels wonderful against the skin, but has its drawbacks for shirts namely these shirts “…tend to cost more, wrinkle easily, and they must be hand-washed (even dry cleaning can damage them) to maintain the material’s integrity.” Since neither my husband nor I have any intention of hand-washing his shirts, this one is off the table.

All of this leaves me with the conclusion: the shirt will have to be 100% cotton. But there are lots of varieties of fine 100% cotton. There is poplin/broadcloth, twill, Oxford cloth, chambray, dobby, end-on-end, seersucker etc.…they all work for the structure necessary for the shirt.

But where does the best cotton shirting come from? Some of the best shirting comes from Italy (no surprise here – they design and weave some of the finest fabrics in the world) often made from Egyptian cotton but woven Italian style. This seems like it might be a good choice for my husband’s bespoke shirt, but where to get it and what will it look like? Enter the fabric shopping adventure.

I usually buy my good fabrics on Queen Street West in Toronto where there continues to be a fabric district. But I wanted to explore a fabric store uptown in an area close to two very high-end residential districts. A bespoke shirt should be made from a fabric chosen by the eventual wearer of said shirt so my husband and I got on the subway and took the train almost as far north as it goes, got off and walked for ten minutes until we reached Maryam’s Fabrics.

A small, well-curated store, Maryam’s, which describes itself as “Toronto’s High End Imported Fabrics Store,” specializes in seriously high-end fabrics from cotton shirting, through silk knits to bouclés for Little French Jackets. We began to explore.

I first noted the “sale” fabrics in a bin near the front of the store were all over $25 a metre. This is a good way to get your head around what will come next. I lovingly caressed a few silk knits that clocked in at $40 a metre. Then I happened upon the most expensive fabric I had ever seen: marked “Chanel”, it was a bouclé that will set you back $500 a metre. Yes, five hundred dollars a metre! But it was divine.

Just look at those sumptuous bouclés !

The sales associate, an older woman who knew her fabrics, brought out three bolts of Italian shirting that they had special ordered in for a client who had all his shirts made for him. Among the three, my husband fell in love with a black fabric sporting white galaxies. A bit fun, yet tasteful.

My husband shopping for his Italian cotton at Maryam’s.

And did it feel wonderful! Well, dear readers, are you ready for the price tag? The selected fabric was $80.00 a metre. Yes, eighty dollars. So, of course, we immediately bought two and a half metres. This was, without a doubt, the most expensive fabric I would ever cut into – which is the reason I did not one but two test shirts before even cutting anything more than my four-inch test square for laundering (and I panicked even at that!).

Is this not extraordinary? And it feels wonderful!

So, I began the test shirt with the grey-striped cotton fabric that had cost something like $15.

When I did the fitting, I found that the neck was a bit too big for my husband and the collar which had to button down needed to be enlarged slightly. That being said, he actually liked this shirt and wears it.

I had enough of the striped fabric to do a short-sleeve test to get the neckline right. Then it was time to cut into the main attraction. I finally had to hold my breath and just do it.

I have to say that the fabric was a dream to work with. Although most bespoke shirt-makers will tell you not to use fusible interfacing (and I bought some muslin specifically for interfacing purposes), I ended up fusing interfacing and it worked beautifully.

I referred often to David Page Coffin’s book (which I talked about in part one of this project) as well as one of his Bluprint video classes. After trying it two or three times on test pieces, I learned to use the “burrito method” for attaching the collar and stand to the neckline. This gives a finer finish to the front of the shirt and obviates the necessity for hand-sewing the inside of the collar stand to the neckline as per most of the commercial pattern instructions.

In the end, we were both very pleased with the results. Here’s a look at the finished product in action…

The festive season was the perfect time for him to wear it – and to tell everyone that I made it for him. One of my proudest moments!

Happy New Year everyone!

Reference:

https://www.josbank.com/dress-shirt-materials-an-introduction