[*Little Black Jacket sometimes referred to as the LFJ or Little French Jacket]
A couple of days ago I ventured down to the fashion district here in Toronto to my favourite fabric store to peruse their bouclé and silk stock – because I’m finished! My Little French Jacket, that is. When I started this process back in March, I vowed that I’d take my time and get it right. I would not rush: I would get the fit right; I would take the time to do tests of all machine and hand techniques involved; and that I would make friends with my seam ripper. Well, I have done that, and the jacket is comfortable (oh so comfortable), fits well, and I think it adds a certains je ne sais quoi to my wardrobe. But it doesn’t quite pay complete homage to Chanel’s original LBJ style, and the story of why this is the case is related to the final part of the journey that I have yet to tell you about: it’s all about the trim.
No one seems to have written anything much about Chanel’s design considerations when she decided on how to trim her original 1954 tweed jackets, but we do know that they (almost) always have had trim.
Often the trim contrasts with the fabric, but these days the House of Chanel’s jackets more often seem to have trim that blends into the fabric. Whichever way you look at a Chanel jacket, it usually has trim around the neckline, down the front, across the pockets and on the sleeves. But that’s not all.
Chanel always said that the inside of a garment ought to be as beautiful as the outside, so she used exquisite silks to line them, and these little jackets were adorned with flat-link chains along the hemline. Originally, these chains played a practical role in ensuring that the jacket hung well even when the wearer raised her hands. You have to admit, though, they make a wonderful style statement even if you’re the only one who knows it’s there. Then, just imagine throwing the jacket over your chair back when dining out. Ah, the chain is now a part of your jewellery! So, in creating an homage to Chanel’s jacket, it’s important to consider the final trimming.
So, I begin to trim the jacket. I have purchased two types of gimp braid: one is a folded gimp, the other a more traditional flat gimp. Strictly speaking about definitions, gimp is made from twisted silk, worsted, or cotton and has a cord or wire running through it. Traditionally, gimp has been used in upholstery work and in making hand-wrought buttonholes. Gimp is then braided to produce the various types we see today and that the young woman in the fabric store who sold mine to me said they call it “Chanel braid.” The truth is that many (if not most) authentic Chanel jackets are trimmed with anything but gimp, although it does give that Chanelesque look especially when layered over other materials such as self-fringe or grosgrain ribbon. Anyway, my plan was to layer flat gimp braid over the folded gimp braid that would fold over all the edges. Well…
That idea didn’t work out very well. In my last post about the pockets, this is when I began to see a problem. First, I delayed the pocket finishing so that I could contemplate the trim a bit more. So glad I did! If I had put the layers of braid on the pockets (notwithstanding the significant bulk problem I would have had), I would likely have had to remove the pockets simply because of how they looked.
First, I hand-stitch the braid to the neck and front edges – it has to be hand-stitched first on the outside, then on the inside. It takes days. Then I pin the flat braid on top and begin hand-stitchng. I get all the way across the front and notice that it is distorting the line of the hem. Although I like the look of the layered braid, I cannot have a distroted hem. So, I finally un-pick the hand-stitching on the top braid and decide that the trim is finished.
In the meantime, I’ve been toyng with the braid which I had fully planned to put on the sleeve hems and on the pockets à la Chanel, but the look is too heavy. The pattern in the bouclé is such that it has heavy black patches and any more black just looks overdone.
So, the outside trim is well and truly finished. Now it’s on to the chain.
I had originally purchased a very lightweight gold-coloured chain. When I researched Chanel chains, though, I discovered that her jackets use various chain weights depending on the weightiness of the fabric, and that sometimes the chains are not even gold-coloured. Jackets that are trimmed with silver-toned buttons, for example, will have silver-toned chains. Huh.
The light-weight chain looks peculiar on this fabric, so I find a heavier one and bingo! I have the right chain. Then, ensurng that the chain remains flat, I start securing it invisibly with a double-strand of black, silk thread to the hem just below the lining – it fits neatly between the lining and the turn-up of the hem as it turns out. I start about 2 cm in from the jacket front and continue all the way across, pinning only a few links ahead to maintain the flat edge. I also do the stitiching in fairly short sections – this ensures that the thread does not knot and should a bit of the chan ever come undone, I’ll only have to re-stitch a small section. It’s time-consuming, but worth it. I then ask my husband to join me with his pliers to remove the link when I’ve come to the end. I choose not to measure and cut before I begin to avoid the dreaded possibility of cutting it too short!
The final stitch is in and god love my husband, he pours me a gin-and-tonic!
I try the jacket on and discover it’s the most comfortable jacket I’ve ever worn – and I love it! I’m dying to wear it, but it’s the height of summer in this part of the world, so I’ll have to put it away until October. I just might be able to wear it when we travel to Nova Scotia in September, though. They have cool evenings.
I’m taking only a brief break from jacket sewing to make a linen dress, but I’ll be back at the jackets as soon as the fall bouclé shipments are in! À bientôt!
You must be logged in to post a comment.