My Tailored Blazer Project: The Finished Product

It seems so appropriate that as we enter the final days of 2020, I have finally finished that last of my two major 2020 sewing-designing-related projects for the year. At the beginning of the year, I set a goal to master (as much as possible) shirt-making. That project took up much of the first half of the year. The second goal I had was to learn a few things about traditional tailoring. In September, I began the project – I have now finished it.

When last we spoke (okay, I did most of the “speaking”), I had a complete blazer – complete except for a few crucial details, namely a lining, buttonholes and buttons.

• 

• 

I waited until I was at the point of needing a lining before cutting the silk charmeuse to avoid the dreaded fraying that is a characteristic of this otherwise divine fabric. If you’ve never worn a jacket (or dress) lined with silk charmeuse, you are missing out on one of life’s exquisite pleasures – and I’m sure we can all agree that treats like these we can experience alone are much needed in this strange year.

It’s a bit pricey, but it’s worth every penny. Anyway, when you cut it out (single layer for the least amount of frustration), the silk filaments begin to fray ever so slightly at first, then it gets worse if you manipulate it too much. Thus, I wait until the last possible moment to cut.

You’ll recall that I’m using Vogue 9099 for this project. Of course, this one is a Claire Schaeffer pattern where she wrote the twelve pages of instructions. The pattern also provides separate pattern pieces for the lining, so you don’t have to create them yourself. My problem is that some of the instructions were a bit perplexing.

• 

• 

• 

For example, when the pattern says, “cut here for right side,” which “right side” does it mean? Right side as you look? As the lining is right side out? Inside out? I recut it twice and still didn’t seem to get it right. I figured that this meant the side of the lining in the back that went on the right side of my body. Well, I thought wrong. Thus, I ended up with a vent lining that didn’t work. I had to do a frustrating workaround but ended up with something acceptable., Whenever I make a boo-boo like this, I always try to make it look intentional. It sort of worked.  The bottom line for me was that the instructions were sub-optimal. After a career in corporate communications, writing and twenty-six years as a university professor, I figure that I should understand simple instructions. Nope. I’d cut my own lining the next time.

I was happy I had decided to insert it by hand (although it’s a bit of a hybrid insertion since I set the sleeves in the lining by machine). This made it easier to correct my mistakes. I would highly recommend waxing the thread! It made it so much easier.

• 

• 

Then it was time for the buttonholes. Well, of course, you’re supposed to do hand-worked buttonholes. I’ve done them before, and I have to admit that I’m not that good at it. So, I did a few samples of machine buttonholes, and I was pleased with the results. In fact, with this fabric, the buttonholes are all but invisible!

Then I popped on the buttons, did a final press, and voila! A new jacket!

• 

• 

Through my research and this process, I’ve learned so much about the fine art of tailoring – and it is, indeed, a fine art if you ask me. Next year, I’m going to try my hand at modern tailoring that uses fusibles. Well, that’s only one of the projects I’m planning. In the meantime, I just need a place to wear a nice blazer. Oh well, come the spring, I’m just going to wear it when I go out for a walk around town! And…