It’s been quite a process, this project of paying homage to a Chanel icon by constructing a *Little Black (French) Jacket for myself. Many have gone before me – I was happy to use their experience as guidance when I was seeking my mentors to help along the way. Sometimes when I’m sitting at my counter sewing hundreds of tiny little stitches to connect pieces of the silk charmeuse lining together inside my jacket I consider what it must have been like for the seamstresses in the Chanel atelier in 1954 when they were working on the original jackets. Indeed, I wonder what it must be like today for seamstresses in the fashion houses who work on the haute couture garments – there is still a lot of hand sewing. But I’m getting ahead of myself. I need to tell you about what I’m doing.
Now that I have all my pieces quilted by machine, it’s time to construct the body of the jacket. My first task is to sew together the shoulder seams (remembering that I’m using a 3.0 mm stitch and a walking foot for all of these seams in the body), carefully matching the seam lines of the princess seams AND the pattern. It’s a bit fraught, but I do it and it’s perfect! Then it’s on to the side seams.
Since I’m feeling a bit nervous about making sure this is perfect, I decide to baste the seam line first. I do this only on one side only to find that it makes no difference: my pin-basted side works just a well. Years ago, I was taught to pin baste perpendicular to the seam so that the sewing machine could saunter over the pins. These days, everyone says do not ever sew over pins – take them out as you go along. In fact, the Craftsy instructor whose course I’m following, puts her pins in along the seam line which make a lot of sense if you really want to look at the right side to see if everything is matched. Of course, she takes out each pin along the way before she gets to it while sewing. I am now doing the same thing. Those perpendicular pins that I sewed over did, indeed, from time to time, get caught directly under the needle causing the pin to bend, often the needle to break, and there is no telling what kind of cumulative damage that had been doing to my old sewing machine! I will never again sew over a pin!
I finish sewing the side seams and the moment of truth is upon me. Are the patterns perfectly matched? Yes! What a relief. Now it’s time to press the seams open – together flat first, then open with the tip of the iron on the wrong side, finally a light press from the right side.
Then the hem has to be stitched so that it doesn’t fall in future. The instructor uses an invisible catch stitch: I choose a small herringbone stitch (which is often also called a catch-stitch) so that the fraying ends are more secure. Then the front and edges have to be pressed in using the edge of the stay tape as a guide. The neck is tricky since it has to be snipped in – the fraying of the fabric can be a bit troublesome!
The lining now has to be joined at the shoulders and side seams by laying the front pieces flat over each seam, trimming the excess lining, then laying the back pieces over, trimming then folding under, pinning along the way. The lining is placed so that there is a small line of the jacket fabric showing on the inside along the front and neck edges, and there is no chance of the lining peeking out to the outside. The hem is similar, but the hem is folded up so that a half an inch of the fabric is showing. Once all that pinning is done, I start sewing. And I sew a lot.
I use silk thread, a very short, fine needle and a slip stitch for the seams. I use a stitch that is new to me for the front, neck and hem edges. It’s a bit like a ladder that when pulled gently actually creates a completely invisible thread line inside the folds adhering the lining to the fabric. It’s beautiful.
So I finally turn the jacket body right side out and put it on Gloria Junior (that’s what I call my mannequin). She’s still armless, but I love her anyway! Sleeves are next up!
A helpful resource:
Here’s a great blog post I found on How to Do the Ladder Stitch: http://www.squishycutedesigns.com/ladder-stitch/
The G. G. Files 